Sale
For expert tips and tutorials to take your lighting projects to the next level.
Item Code | Price | Stock |
SA 36105-3 | $ 78.02 | 0 |
SA 36105-5 | $ 127.69 | 31 |
SA 36105-10 | $ 246.37 | 30 |
$78.02 – $246.37 Excl. GST
DOWNLOADS
Power Calculator
Easy to estimate your power supply needs.
Our power calculator helps you determine the power supply needed for your LED light projects.
*Simply answer the questions below, and you'll receive a quick recommendation.
Enter the required number of the LEDs or Metre
METREWhere will the power supplies be installed?
e.g) Strip or Neon Flex : 8 Metres
87 in stock
Weight | 250 g |
---|---|
Dimensions | 211 × 40 × 30 mm |
BRAND |
LTECH |
INPUT VOLTAGE |
220 -240VAC |
MAX CURRENT LOAD |
6A X 3CH, MAX 18A |
MAX OUTPUT POWER |
216W(12V), 432W(24V) |
GREY SCALE LEVELS |
4096 X 4096 X 4096 |
RF REMOTE DISTANCE |
100M |
RADIO FREQUENCY |
433.92MHz |
WORKING TEMPERATURE |
-30 °C ~ 60 °C |
REMOTE OUTPUT POWER |
8mW |
WARRANTY |
5 YEAR |
Dimension
Weight | N/A |
---|---|
Dimensions | 10 × 17 mm |
POWER |
17.3W |
VOLTAGE |
DC 24V |
CURRENT(A) |
0.72 |
LUMINOUS FLUX |
134lm |
EFFICIENCY |
7.9lm/W |
COLOUR |
RGB |
CRI |
80 |
VIEWING ANGLE |
120º STANDARD |
IP RATING |
IP 67 |
CUTTABLE |
55.6mm |
DIMMABLE |
Dimmable with HLG Power Only |
LENGTH |
3M, 5M, 10M |
WARRANTY |
5 YEAR |
Special Note ROLL LENGTHS_Any claim for short supply will only be considered while |
*Note that should be cut and reconnected with end connectors for installation to avoid defects due to moisture penetration. Please follow the steps below
Installation steps
Cut the neon flex | Weld the wire to the PCB board | First, put silicone glue inside of the plug, and quick connector then push into the neon flex |
Wipe off the excess glue and wait for the glue to solidify. |
Available Colour
Compatible with RGB Controller
Important Note
Installation Precautions 1. All installation and connection must be conducted by qualified electrician. 2. A 24V DC class 2 power supply unit must be used with this LED NEON FLEX. 3. Disconnect the mains power before installing or servicing to avoid electrocution. 4. For a wet location installation you must seal all possible water entry points including covers with clear silicone. |
Dimensions(mm)
No account yet?
Create an Account